Tape Application Inspection AI

Confirm tape is present, in position, and laid flat on every spoiler, molding, and trim part, without false rejects.

AI computer vision quality inspection of adhesive tape applied to an automotive spoiler, highlighting correct application alongside short tape and wrinkle defects.

Tape Application Inspection AI for the Toughest Spoiler, Molding, and Trim Lines

  • Deploy Anywhere, Run Everywhere

    Run tape application inspection at the taping station, the end-of-line check, and pack-out, on the edge, on-prem, air-gapped, in your VPC, or via API.

  • One Platform, Full Adoption

    Tools every trim team can adopt, from taping operators and cell leads to quality inspectors, process engineers, and quality managers, no separate ML team required.

  • Secure, Compliant, and Audit-Ready

    Data stays safe with SOC 2 Type II compliance, encrypted data, and an uptime SLA, with an image and result for every part that supports IATF 16949 quality systems and customer PPAP.

  • Missing & Short Tape Strips
  • Position & Edge Offset
  • Wrinkles, Bubbles & Lifted Edges
  • Liner & Pull Tab Presence
  • Splices, Gaps & Overlaps
  • Debris Under Tape
“The vision AI solutions we developed with Roboflow have been a core component of connecting our teams and unlocking their ability to collaborate.”

Lou Stocco

Director of Manufacturing Advanced Analytics, USG

Talk to a Vision AI engineer who's shipped in automotive manufacturing.

Bring us your toughest tape application inspection problem and we'll map a working solution.

Ask us about:

  • Solution architecture that fits your taping stations and your IATF 16949 quality system
  • A live demo on images of your own taped spoilers, moldings, and trim parts
  • Deployment options: edge, on-prem, air-gapped, or VPC
  • ROI modeling against false rejects, retaping, customer rejects, and sorts

Over 80,000 organizations build with Roboflow.

  • Rivian
  • Pella
  • Chobani
  • USG Corporation
  • BNSF Railway
  • American Woodmark
Start where you are

Vision AI is transforming businesses

Customers across the board are solving complex challenges and driving meaningful impact.

  • Automotive customer

    $10 million

    Saved by automatically detecting defects on the production line

  • Logistics & freight company

    90%

    Less time spent manually tracking shipping inventory

  • Building materials supplier

    60%

    Lower customer return rate with improved product quality

Verify Every Tape Strip, from the Applicator to Pack-Out

Add a real-time inspection layer to every taped part with Roboflow Vision AI for tape application inspection. Built for automotive trim plants where acrylic foam tape attaches spoilers, body side moldings, emblems, and claddings, where a missing or short strip goes unnoticed until the part is on the car, and where the camera at the taping station rejects so many good parts that operators stop trusting it.

Presence and coverage:

  • Confirm every tape strip the part calls for is there, and flag a missing strip before the part leaves the station.
  • Detect short strips, gaps, and unplanned splices along each mounting flange, and check overlaps where two strips meet.
  • Verify the release liner and pull tabs are present and intact, so the tape is ready for installation.

Position and application quality:

  • Measure where each strip sits against the flange edge and flag tape that is offset, angled, or hanging over the part.
  • Find wrinkles, trapped bubbles, lifted edges, and debris under the tape that weaken the bond.
  • Run the same checks next to adhesive and glue bead inspection on parts that use both tape and dispensed adhesive.

From false rejects to checks your line trusts:

  • Replace rule-based checks that fail good parts when black or gray tape sits on a black part, the part shifts in the fixture, or the light changes.
  • Send pass or fail to the PLC so a bad part is held at the station for retaping instead of reaching pack-out.
  • Log an image and result for every part against part number, lot, and shift, and trend misses by applicator and operator.

Bring intelligence to every taped part today. Stop missing and misplaced tape from becoming loose trim, customer rejects, and sorts, and stop false rejects from slowing the line.

‍

Frequently asked questions

What is tape application inspection with Vision AI?

Tape application inspection with Vision AI uses cameras at the taping station and trained computer vision models to confirm every strip of attachment tape is present, in the right position, and laid flat, with an image and result for every part. It pairs with assembly verification for the clips, fasteners, and components on the same part.

Why do rule-based cameras false-reject tape checks?

Rule-based tools look for a fixed contrast or edge in a fixed place. Black or gray foam tape on a black or textured part gives them little contrast to work with, and a small shift in the fixture or a change in light pushes a good part outside the rule. A model trained on images of your own good and bad parts learns what tape looks like across that variation, so it passes good parts and still catches the short strip. Anomaly detection can also learn what a good part looks like and flag anything new.

Can it inspect tape with the liner still on?

Yes. Attachment tape usually ships on the part with its colored release liner still on, and the model learns to find each strip by its liner and edges, confirm the liner and pull tabs are intact, and check position along the flange. Where tape is applied without a liner, it learns the foam itself.

Can it connect to our PLC and MES?

Yes. Roboflow runs on-prem and fully air-gapped, and sends results over OPC UA, MQTT, or REST to the station PLC and your MES, with part number, lot, and shift on every record.

Roboflow serves as the inspection engine, and your quality and process teams own the tape positions, tolerances, and acceptance criteria.

‍